GW Instek PEL-3000 Series User Manual - Manual (Page 105)

OPERATION
103
RAMP ON, OFF When turned on the current
transition is evenly ramped
from the start of the step to
the end of the step. When
turned off the current
transition is stepped.
Time
amplitude
Step time
Ramp = On
Time
amplitude
Step time
Ramp = Off
TRIG OUT ON, OFF When TRIG OUT is set to
ON, a trigger signal is
output from the TRIG OUT
BNC terminal at the start of
the step. See page 150 for
details.
Time
amplitude
TRIG OUT = ON
TRIG OUT
Start of step