GW Instek PEL-3000 Series User Manual - Manual (Page 200)

PEL-3000 User Manual
198
Setting Range
H Range
0V~157.5V
M Range 0V~15.75V
Resolution
H Range
10mV
M Range 1mV
Accuracy of Setting *1
H, L Range ±(0.1 % of set + 0.1 % of f.s)
Input current variation *2
12mV
*1 At the sensing point during remote sensing under the operating range of the
input voltage. It is also applied for the condition of the parallel operation.
*2 With respect to a change in the current of 10 % to 100 % of the rating at an
input voltage of 1.5 V (during remote sensing).
CP Mode
Model PEL-3021 PEL-3041 PEL-3111
Operating Range
H Range
17.5W
~175W 35W~350W 105W
~1050W
M Range 1.75W
~17.5W 3.5W~35W 10.5W
~105W
L Range 0.175W
~1.75W 0.35W~3.5W 1.05W
~10.5W
Setting Range
H Range
0W~178.5W 0W~357W 0W~1071W
M Range 0W~17.85W 0W~35.7W 0W~107.1W
L Range 0W~1.785W 0W~3.57W 0W~10.71W
Resolution
H Range
10mW 10mW 100mW
M Range 1mW 1mW 10mW
L Range 0.1mW 0.1mW 1mW
Accuracy of Setting *1
±(0.6 % of set + 1.4 % of f.s *2 )
*1 It is not applied for the condition of the parallel operation.
*2 M range applies to the full scale of H range.