GW Instek PEL-3000 Series User Manual - Manual (Page 106)

PEL-3000 User Manual
104
PAUSE ON, OFF Pause: Inserts a pause at the
end of the step. When
paused, the unit will pause
at the end of the step
current/voltage/resistance/
power level. The sequence
can be resumed by pressing
Next[F2] or by using an
external trigger signal (page
147).
Timing Edit Configuration
Edit Timing
Display
Previous
Menu
LOAD RS232 03/Sep/2012
Timing Edit for Normal Sequence
Loop:
Range:
Mode:
Infinity
ILVL
CC
Chain:
Last
Last Load:
Off
0.00000 A
OFF
Seq.No: S01
N. Seq.
Off
Edit
Sequence
Start sequence
Start S01
Memo: No Memo
Sequence number
Sequence settings
Operation 1. Press FUNC > Sequence[F2] > Normal
Sequence[F1].
 Note that N. Seq.[F1] is off by default.
2. Select Start and select the number of the
starting sequence.
Start: S01 ~ S10
3. Select a Seq. No. and select which sequence to
edit.
Seq. No.: S01 ~ S10