GW Instek PEL-3000 Series User Manual - Manual (Page 204)

PEL-3000 User Manual
202
Resistance Accuracy of setting
H, M Range
±(0.5 % of set *1 + 0.5 % of f.s *2 ) + Vin *3 /500 kΩ
L Range ±(0.5 % of set *1 + 0.5 % of f.s) + Vin *3 /500 kΩ
*1 set = Vin / Rset
*2 f.s. = Full scale of High Range
*3 Vin = Input terminal voltage of Electronic Load
Power Operating Range
H Range
17.5W
~175W 35W~350W 105W
~1050W
M Range 1.75W
~17.5W 3.5W~35W 10.5W
~105W
L Range 0.175W
~1.75W 0.35W~3.5W 1.05W
~10.5W
Setting Range
H Range
0W~178.5W 0W~357W 0W~1071W
M Range 0W~17.85W 0W~35.7W 0W~107.1W
L Range 0W~1.785W 0W~3.57W 0W~10.71W
Resolution
H Range
10mW 10mW 100mW
M Range 1mW 1mW 10mW
L Range 0.1mW 0.1mW 1mW
Accuracy of Setting *1
±(0.6 % of set + 1.4 % of f.s *2 )
*1 It is not applied for the condition of the parallel operation.
*2 M range applies to the full scale of H range.
Soft Start
Operation Mode
CC, CR and CP
Selectable Time Range
1~ 200 ms/Res: 1ms
Time Accuracy
±(30%of set + 100us)
Remote Sensing
Voltage that can be Compensated
2V for a single line