GW Instek PEL-3000 Series User Manual - Manual (Page 134)

PEL-3000 User Manual
132
User’s Default Setting
Description The currently active settings can be set as the
―User’s Default‖ settings.
Save User’s
Default Setting 1. Press
Shift
+
File
FUNC
.
2. Select Default with the Media[F1] soft-key.
3. Press Save[F3].
 The User’s Default is saved immediately.
Recall User’s
Default Setting 1. Press
Shift
+
File
FUNC .
2. Select Default with the Media[F1] soft-key.
3. Press Recall[F4].
4. Press Recall[F4] again to confirm.
 A User’s Default must be saved first before it
can be recalled.