GW Instek PEL-3000 Series User Manual - Manual (Page 142)

PEL-3000 User Manual
140
External Resistance Control – Operation
Description External resistance control can be used to
control the current, voltage, resistance and
power for CC, CR, CV and CP modes.
Configuration for each operating mode is the
same.
CC Mode Proportional Control:
Input current = rated current × (external
resistance/10).
Inverse Control:
Input current = rated current × (1 - external
resistance/10).
Input
Current
External
Resistance
Rated
Current
0
Ω
10k
Ω
Proportional control
Inverse control