GW Instek PEL-3000 Series User Manual - Manual (Page 146)

PEL-3000 User Manual
144
Example The LoadOn IN setting determines whether the
load is turned on when the external switch is
closed (low) or open (high).
High
Low
High
Low
LoadOn In = High
Load
On
Off
Load on
Load off
LoadOn In = Low
Operation:
Configuration 1. Press Main
> Configure [F5] > Next Menu [F4]
> External [F3] and set the LoadOn IN setting.
 Set to Low if you want the load to be turned on
when the switch is closed.
 Set to High if you want the load to turn on when
the switch is open.
Note
When external control is used to turn the load off,
the load key cannot be used to turn the load on.
However the reverse is not true. If the load has
been turned on by external control, the load key
can be used to turn the load off.