GW Instek PEL-3000 Series User Manual - Manual (Page 130)

PEL-3000 User Manual
128
Memory:
Setup Memory:
Preset:
NSeq:
FSeq: Model_file number.M
Model_file number.S
Model_file number.P
Model_file number.N
Model_file number.F
6. Press Recall[F4] to recall.
 Recall Ok will be displayed when the recall has
been completed.
File Utilities Press File Utility[F5] to access the file utility. See
page 128 for details.
 Change the USB path.
 Rename files or create directories.
Caution
If “Machine Type Error” is displayed it indicates
that the file that you are trying to recall originated
from a different model. You can only recall files
from the same model.
Recall Memory Safety Setting
Description By default when you try to recall preset settings
from internal memory, a message will appear
asking you to press the Enter key to confirm.
This is the standard safety measure to ensure
that the wrong setting is not recalled. This
safety measure can be disabled by setting the
Mem. Recall setting to ―Direct‖.
Operation
1. Press Main > Configure[F5] > Other[F2] and
set the Mem. Recall setting.
Range: Safety, Direct