GW Instek PEL-3000 Series User Manual - Manual (Page 53)

OPERATION
51
Basic Operation
The PEL-3000 supports 7 main operating modes:
CC, CC+CV;
CR, CR+CV;
CV;
CP, CP+CV
CC Mode
Description In Constant Current Mode the load units will
sink the amount of current programmed.
Regardless of the voltage, the current will stay
the same. For more details on CC mode, please
see the Appendix on page 186.
Warning
If you change the mode or the range when the load
is already on, the load will be turned off
automatically.
Operation 1. Make sure the load is off.
2. Press Main .
3. Select CC mode with the Mode[F1] soft-key.
4. Select the current range with the I Range[F2]
soft-key.
Range: High, Middle, Low
5. Select the voltage range with the V Range[F3]
soft-key.
Range: High, Low