GW Instek PEL-3000 Series User Manual - Manual (Page 55)

OPERATION
53
CR Mode
Description In Constant Resistance Mode, the unit will
maintain a constant resistive load by varying
the current. CR mode uses ohms, Ω (resistance)
or siemens, S (conductance) for the setting
units. For more details on CR mode, see the
appendix on page 187.
Warning
If you change the mode or the range when the load
is already on, the load will be turned off
automatically.
Operation 1. Make sure the load is off.
2. Press Main .
3. Select CR mode with the Mode[F1] soft-key.
4. Select the current range with the I Range[F2]
soft-key.
Range: High, Middle, Low
5. Select the voltage range with the V Range[F3]
soft-key.
Range: High, Low