GW Instek PEL-3000 Series User Manual - Manual (Page 112)

PEL-3000 User Manual
110
Fast Sequence Overview
Description A fast sequence is comprised of a user-defined
number of steps that can be executed at a high
frequency. Unlike normal sequences, each step
in a fast sequence has the same execution time
(time base).
 This mode is only available for CC and CR
mode.
 Up to 1000 discrete steps can be configured
using fast sequences.
 Each fast sequence can have a memo note
attached to it.
 Fast Sequences can be looped up to 9999 discrete
times or for an infinite amount of times.
 Fast sequences can be configured to hold a set
current or resistance at the end of the load.
 No ramping function can be used with the Fast
Sequence function.
Fast Sequence
STEP 01
STEP 02
:
STEP N
Loop: