Gpib function check – GW Instek PEL-3000 Series User Manual User Manual

Page 170

Text mode
Original mode

PEL-3000 User Manual

168

GPIB Function Check

Functionality
check

Please use the National Instruments
Measurement & Automation Controller
software to confirm GPIB/LAN functionality.

See the National Instrument website,
http://www.ni.com for details.

Note

For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.

Operation

1. Start the NI Measurement and

Automation Explorer (MAX)
program. Using Windows, press:

Start>All Programs>National

Instruments>Measurement & Automation

2. From the Configuration panel access;

My System>Devices and Interfaces>GPIB0