GW Instek PEL-3000 Series User Manual - Manual (Page 153)

EXTERNAL CONTROL
151
settings.
Current
IMON V
Rated
Current
Monitor Output Range
Monitor Connector Current Range
Monitor
Output Range
I MON OUT (BNC)
H, L 0 ~ 1V
M 0 ~ 0.1V
I MON (J1)
H, L 0 ~ 10V
M 0 ~ 1V
I MON OUT BNC
Connector The IMON OUT BNC connector outputs a
voltage of 0 ~ 1V for the High and Low current
ranges and 0 ~ 0.1V for the Middle current
range. The common potential is connected to
the chassis ground potential.
J1 Connector The voltage across pins 2 and 3 outputs a
voltage of 0 ~10V for the High and Low current
ranges and 0 ~ 1V for the Middle current range.
The common potential is connected to A COM
(negative load terminal).