GW Instek PEL-3000 Series User Manual - Manual (Page 84)

PEL-3000 User Manual
82
Display
2.596
V
500.06
mA
1.2982
w
CV B Value 15.000
CV A Value 15.000
LOAD RS232
A Value
Fine
03/Sep/2012
V
V
OPP Alarm
Please Press Enter
To Clear Alarm
OPP
OCP indicator
Alarm message
when OPP is set
to Load Off
Mode
CV
I Range
L 0.7A
V Range
L 15V
Response
Fast
Configure
UVP
Description If the UVP is tripped, the PEL-3000 will turn off
the load.
The UVP levels can be set from 0V to 10%
higher than the rating voltage.
Operation 1. Press Main > Configure[F5] > Protection[F1]
and set the UVP Level.
Range: UVP Level: OFF, 0~Rating voltage +
10%
Alarm  The UVP indicator and a message will only
appear on the screen when the input voltage is
below the UVP level. The Enter key must be
pressed to clear the alarm message.
 To clear the UVP indicator, remove the cause of
the under voltage ~ i.e., increase the input
voltage.