GW Instek PEL-3000 Series User Manual - Manual (Page 70)

PEL-3000 User Manual
68
Display
Mode
CC
I Range
H 35A
V Range
H 150V
Function
Dynamic
Configure
0.00
V
0.000
A
0.00
w
Timer1 0.025
SlewRate 2500.00
SlewRate 2500.00
LOAD RS232 03/Sep/2012
ms
mA/uS
mA/uS
Slewrate settings Slewrate settings
CV Mode Response Speed
Description The response speed setting is the response
speed for the negative feedback control of the
load current when used in CV mode. Response
speed settings are only applicable to CV mode.
 A response speed that is too fast could cause the
unit to be unstable.
 Reducing the response speed can improve
stability.
Operation 1. Make sure the load is off.
2. Press Main . Make sure the unit is in CV
mode by using the Mode[F1] soft-key.
3. Select the response speed with the Response[F4]
soft-key.
Range: Slow, Fast