GW Instek PEL-3000 Series User Manual - Manual (Page 117)

OPERATION
115
Sequence Timing configuration is complete.
 Go to Data Edit to edit the steps used in the Fast
Sequence. Page 115.
 Go to Running a Fast Sequence to run the fast
sequence. Page 117.
Data Edit Configuration
Data Edit Display
Previous
Menu
LOAD RS232 03/Sep/2012
Data Edit for Fast Sequences
OFF
0005
Insert
Point
Save
Step: 0001
TRIG OUT:
Value: 0.00000
/
Delete
Point
Active step number
Total number of steps
Step settings
FILL
FILL Display
Save
Previous
Menu
End_Step 0010
Start_Step 0001
LOAD RS232 03/Sep/2012
End_Value:
Start_Value:
1.00000
0.00000
Fill Edit for Fast Sequences
A
A
Operation 1. Press FUNC > Sequence[F2] > Fast
Sequence[F2] > Edit Sequence[F2] to enter the
Data Edit configuration menu.