GW Instek PEL-3000 Series User Manual - Manual (Page 42)

PEL-3000 User Manual
40
System
Info
Load Interface Time Set
LOAD RS232 03/Sep/2012
Model : PEL-30XX
Firmware Ver. : 1.01.011
Serial Number : 00000001
Other
http://www.goodwill.com.tw
Update Firmware 1. Insert a USB drive into the USB port. Ensure
the USB drive has the firmware file located in
the root directory.
2. Press
Shift
+
File
FUNC
.
3. Select USB with the Media[F1] soft-key.
4. Press the File Utility[F5] soft-key.
5. Select the *.UPG upgrade file and press
Select[F1] twice. Once to select the file and once
to confirm.
6. Wait for the update to complete and reset the
power when prompted.
Note
Do not turn the load generator off or remove the
USB memory when the firmware is being read or
upgraded.