GW Instek AFG-3000 Series - Manual (Page 88)

AFG-3000 Series User Manual
88
5. Use the selector keys and
scroll wheel or number pad
to enter the FSK rate.
/
6. Press F1~F5 to select the
frequency unit.
~
Range FSK Rate 2mHz~100kHz
Default 10Hz
Note If an external source is selected, FSK Rate settings are
ignored.
FSK Source
The AFG-3000 accepts internal and external FSK sources, with
internal as the default source. When the FSK source is set to internal,
the FSK rate is configured using the FSK Rate function. When an
external source is selected the FSK rate is equal to the frequency of
the Trigger INPUT signal on the rear panel.
Panel Operation 1. Press the MOD key.
2. Press F3 (FSK).