GW Instek AFG-3000 Series - Manual (Page 115)

MODULATION
115
Burst Phase
Burst Phase defines the starting phase of the burst waveform. The
default is 0˚.
Panel Operation 1. Press the Burst key.
2. Press F1 (N Cycle).
3. Press F3 (Phase).
4. The Phase parameter will become highlighted
in the Waveform Display area.
5. Use the selector keys and
scroll wheel or number pad
to enter the phase.
6. Press F5 (Degree) to select
the phase unit.
Range Phase -360˚~+360˚
Default 0˚