GW Instek AFG-3000 Series - Manual (Page 183)

REMOTE INTERFACE
183
Establishing a Remote Connection
The AFG-3000 supports USB, RS232 and GPIB remote connections.
Configure USB interface
USB
configuration PC side connector Type A, host
AFG-3000 side
connector Type B, slave
Speed 1.1/2.0 (full speed)
Panel Operation 1. Press the Utility key
followed by Interface (F2)
and USB (F3).
2. Connect the USB cable to
the rear panel USB B (slave)
port.
3. When the PC asks for the USB driver, select
XXXXXXX.inf included in the software
package or download the driver from the GW
website,
www.gwinstek.com .