GW Instek AFG-3000 Series - Manual (Page 184)

AFG-3000 Series User Manual
184
Configure RS232 interface
RS-232C
configuration Connector DB-9, Male
Baud rate 9600, 19200, 38400, 57600,
115200
Parity None/8Bits, Odd/7Bits,
Even/7Bits
Stop bits 1 (fixed)
Pin assignment 1 2 3 4 5
6 7 8 9
2: RxD (Receive data)
3: TxD (Transmit data)
5: GND
4, 6 ~ 9: No connection
PC connection Use the Null Modem connection as in the below
diagram.
Panel Operation 1. Connect the RS-232 cable to
the rear panel RS-232 port.
2. Press the Utility key
followed by Interface (F2)
and RS-232 (F2).
3. Press Baud Rate (F1) and
choose a baud rate
(F1)~(F5). Press return