GW Instek AFG-3000 Series - Manual (Page 272)

AFG-3000 Series User Manual
272
Return Parameter Returns the number of cycles.
INF INF is returned if the number of cycles
is continuous.
Example SOUR1:ARB:NCYC?
+1.0000E+02
The number of ARB waveform output cycles is
returned (100).
SOURce[1]:ARB:OUTPut:MARKer
Source Specific
Command
Description Define a section of the arbitrary waveform for
marker output. The marker is output from the
SYNC terminal on the front panel.
Syntax SOURce[1]:ARB:OUTPut:MARKer
[[,]]
Parameter Start address*: 0~1048,576
Length*: 0 ~ 1048,576
* Start + Length ≤ currently output arbitrary waveform
Example SOUR1:ARB:OUTP:MARK 1000, 1000
The marker output is for a start address of 1000
with a length of 1000.
SOURce[1]:ARB:OUTPut
Source Specific
Command
Description Output the current arbitrary waveform in volatile
memory. A specified start and length can also be
designated.
Syntax SOURce[1]:ARB:OUTPut [[,]]
Parameter Start address*: 0~1048,576
Length*: 0 ~ 1048,576
* Start + Length ≤ currently output arbitrary waveform
Example SOUR1:ARB:OUTP 20 200