GW Instek AFG-3000 Series - Manual (Page 87)

MODULATION
87
6. Press F1~F5 to select the
frequency range.
~
Range Waveform Carrier Frequency
Sine 1μHz~80MHz(3081)/
50MHz(3051)
Square 1μHz~80MHz(3081)/
50MHz(3051)
Triangle 1μHz~1MHz
Ramp 1μHz~1MHz
Pulse 500μHz~50MHz
FSK Rate.
FSK Rate function is used to determine rate at which the output
frequency changes between the carrier and hop frequencies. The
FSK Rate function only applies to internal FSK sources.
Panel Operation 1. Select MOD.
2. Press F3 (FSK).
3. Press F3 (FSK Rate).
4. The FSK Rate parameter will become
highlighted in the waveform display area.