GW Instek AFG-3000 Series - Manual (Page 246)

AFG-3000 Series User Manual
246
Query Syntax SOURce[1]:SWEep:SPACing?
Return Parameter LIN Linear spacing
LOG Logarithmic spacing
Example SOUR1:SWE:SPAC?
LOG
The spacing is currently set as linear.
SOURce[1]:SWEep:TIME
Source Specific
Command
Description Sets or queries the sweep time. The default sweep
time is 1 second.
Note The function generator automatically determines
the number of frequency points that are used for
the sweep based on the sweep time.
Syntax SOURce[1]:SWEep:TIME
{|MINimum|MAXimum}
Parameter 1 ms ~ 500 s
Example SOUR1:SWE:TIME +1.0000E+00
Sets the sweep time to 1 second.
Query Syntax SOURce[1]:SWEep:TIME? {|
MINimum|MAXimum}
Return Parameter Returns sweep time in
seconds.
Example SOUR1:SWE:TIME?
+2.0000E+01
Returns the sweep time (20 seconds).