GW Instek AFG-3000 Series - Manual (Page 100)

AFG-3000 Series User Manual
100
Center Frequency and Span
A center frequency and span can be set to determine the upper and
lower sweep limits (start/stop).
Panel Operation 1. Press the SWEEP key.
2. Press F6 (More).
3. To select span or center,
press F1 (Span) or F2
(Center).
~
4. The Span or Center parameter will become
highlighted in the Waveform Display area.
Span
Center
5. Use the selector keys and
scroll wheel or number pad
to enter the Span/Center
frequency.
/
6. Press F1~F5 to select the
Start/Stop frequency units.
~