GW Instek AFG-3000 Series - Manual (Page 258)

AFG-3000 Series User Manual
258
Syntax SOURce[1]: BURSt:TRIGger:DELay
{|MINimum|MAXimum}
Parameter 0~85 seconds
Example SOUR1:BURS:TRIG:DEL +1.0000E+01
Sets the trigger delay to 10 seconds.
Query Syntax SOURce[1]:BURSt:TRIGger:DELay?
[MINimum|MAXimum]
Return Parameter Delay in seconds
Example SOUR1:BURS:TRIG:DEL
+1.0000E+01
The trigger delay is 10 seconds.
SOURce[1]:BURSt:TRIGger:SLOPe
Source Specific
Command
Description Sets or queries the trigger edge for externally
triggered bursts from the Trigger INPUT terminal
on the rear panel. By default the trigger is rising
edge (Positive).
Syntax SOURce[1]:BURSt:TRIGger:SLOPe
{POSitive|NEGative}
Parameter POSitive rising edge
NEGative falling edge
Example SOUR1:BURS:TRIG:SLOP NEG
Sets the trigger slope to negative.
Query Syntax SOURce[1]:BURSt:TRIGger:SLOPe?
Return Parameter POS rising edge
NEG falling edge
Example SOUR1:BURS:TRIG:SLOP
NEG
The trigger slope is negative.