GW Instek AFG-3000 Series - Manual (Page 283)

REMOTE INTERFACE
283
-222 Data out of range;frequency; value clipped to ...
Example: If the frequency was set to a value out of
range, it is automatically set to an upper or lower
limit.
-222 Data out of range;user frequency; value clipped to upper limit
Example: If the frequency is set to a value out of
range for an arbitrary waveform using, SOURce[1]:
APPL: USER or SOURce[1]: FUNC:USER, it is
automatically set to the upper limit.
-222 Data out of range;ramp frequency; value clipped to upper limit
Example: If the frequency is set to a value out of
range for a ramp waveform using, SOURce[1]:
APPL: RAMP or SOURce[1]:FUNC:RAMP, it is
automatically set to the upper limit.
-222 Data out of range;pulse frequency; value clipped to upper limit
Example: If the frequency is set to a value out of
range for a pulse waveform using, SOURce[1]:
APPL:PULS or SOURce[1]:FUNC:PULS, it is
automatically set to the upper limit.
-222 Data out of range;burst period; value clipped to ...
Example: If the burst period was set to a value out of
range, it is automatically set to an upper or lower
limit.
222 Data out of range;burst count; value clipped to ...
Example: If the burst count was set to a value out of
range, it is automatically set to an upper or lower
limit.