GW Instek AFG-3000 Series - Manual (Page 159)

ARBITRARY WAVEFORMS
159
9. Press F2 (Data).
10. The Value parameter will become highlighted
in red.
11. Use the selector keys and
scroll wheel or number pad
to enter a Data value.
12. Press F5 (Enter) to save
settings.
13. Press F6 (Return) to return
to the previous menu.
14. Press F6 (Return) again to
return to the ARB menu.
Below shows Address and Data set to 40 and
30,000. The edited area is shown in red.
Adding a line to an Arbitrary Waveform
Background The AFG-3000 has a powerful editing function that
allows you to create points or lines anywhere on
the waveform.