GW Instek AFG-3000 Series - Manual (Page 153)

ARBITRARY WAVEFORMS
153
Set the Vertical Display Properties
Like the horizontal properties, the vertical display properties of the
waveform display can be created in two ways: Setting high and low
values, or setting the center point.
Panel Operation 1. Press the ARB key.
2. Press F1 (Display).
3. Press F2 (Vertical).
Setting the Low
Point 4. Press F1 (Low).
5. The parameter Vertical Low will become
highlighted.
6. Use the selector keys and
scroll wheel or number pad
to enter the Vertical Low
value.
7. To undo, Clear (F4) can be
pressed before Enter is used.
8. Press F5 (Enter) to save
settings.
9. Press F6 (Return) to return
to the previous menu.