Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 96)

4-24
M-4659
• If you open a file that was created prior to a time change on the recorder and then link
subsequent files, files from the open file up to the point of the time change are linked. If you
open a file that was created after a time change on the recorder and then link previous files,
files starting from the point of the time change are linked.
Starting (open) file
Time
Time
Recorder time changed
Starting (open) file
File created during the time change
File created during the time change
Files up to this file can be linked
Files starting from this file can be linked
• The linked data display is based on the time of the starting file.
Saving the Link Settings File
Select [File] - [Save Display Setting As] to save the link settings file to the same directory
as the linked files.
The file name takes the form of the original file name with the file extension .ldx.
You can save the file by specifying the file name and the destination directory by
selecting [File] - [Save Display Setting].
Note
Files with the extension .ldx contain only link settings. To reopen a linked file, you must have
the original data file.
4.5 Linking Files and Saving the Link Settings File