Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 114)

5-1
M-4659
Troubleshooting
1
2
3
4
5
6
7
8
Index
Chapter 5 Troubleshooting
5.1 Troubleshooting
Launcher
Message Corrective Action Reference Section
Check communication settings. Open the [Network] dialog box and check the settings. 2.3
Hardware Configurator
Warning Message List
Message Reference Section
System settings have been changed. Input configuration and data will be initialized. Do you want to
proceed? 3.1 6.1 7.1 8.1
Data created in 2038 or later cannot be handled. – – – –
Some A/D converters are faulty. Some items cannot be set. – – – –
Some information cannot be set. Do you still want to continue? – – – –
Settings may not be made correctly since the configuration does not match the connected recorder.
Do you still want to send? 3.7 6.7 7.13 8.7
The current setup data will be initialized. 3.2 6.2 7.2 8.8
Setup data will be received from the recorder. 3.1 6.1 7.1 8.1
The setup data will be sent. 3.7 6.7 7.13 8.7
Memory sampling will be stopped. 3.10 6.10 7.16 8.11
Memory sampling will be started. 3.10 6.10 7.16 8.11
Error List
Message Corrective Action Reference Section
Illegal file to load. Select another file. 3.1 6.1 7.1 8.1
Failed to load the file. Try to load the file again. If still not possible, the file may be
damaged. Select another file. 3.1 6.1 7.1 8.1
Failed to create a file. Check the free space in the directory. – – – –
Memory sampling in progress.
Stop sending. Send after data has been written to the internal memory of
the recorder . – – – –
Math in progress. Stop sending. Send after math is completed. – – – –
Memory sampling & math in
progress. Stop sending. Send after data has been written to the internal memory of
the recorder and math is completed. – – – –
Saving to the media. Re-send later. Send after data has been saved to the external media. – – – –
Communication error. Check the communication settings. 2.3
Time out. Traffic may be busy. Retry later. – – – –
Illegal user information Check whether the user name is correct. – – – –
Failed to connect. Check the communication settings. Check whether the
recorder is powered ON. 2.3
Communication busy. Retry later. – – – –
Memory error. Exit other programs then restart, or reboot the OS then
restart. – – – –
User level error. No right is given to the login user ID – – – –
Message
Message
Data has been sent.
Data has been received.
Some information has not been sent.
Not allowed.
A password is required.
A user name is required.
Some information requires attention.