Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 224)

7-50
M-4659
Report (Creating Hourly/Daily/Weekly/Monthly Reports, Setting Available When
the Computation Function Option is Active)
Set the date and
time at which to
create the report.
Click here. (Or choose the [Setting] menu - [SETUP [Basic] Setting] - [Setting].)
Enable (ON) or disable (OFF) the report channel settings.
Select the reference channel for the report.
Note
Measurement channels cannot be set for reference channels on 0 measurement channel
models.
Type
Specify the report creation time. For details, refer to the CX User’s Manual
(IM 04L31A01-01E or IM 04L31A01-03E).
Time
Specify the report creation time. For details, refer to the CX User’s Manual
(IM 04L31A01-01E or IM 04L31A01-03E).
Report Channel
There are 12 report channels for the CX1000 and 30 report channels for the CX2000.
The check boxes on the right of the report channels are used to select what report to
create. Clear ([OFF]) the reports you do not want to produce.
RefCh
Selects the report reference channel. For details, refer to the CX User’s Manual
(IM 04L31A01-01E or IM 04L31A01-03E).
Sum Scale
Select whether to convert the results of the TLOG.SUM computation channels to a
specified time unitary value. Select [Off], [Sec], [Min], [Hour], [Day]. This function is
available only if the Computation function is installed.
For details, refer to the CX User’s Manual (IM 04L31A01-01E or IM 04L31A01-03E).
7.7 Basic Measurement Function Basic Settings