Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 116)

6-1
M-4659
Configuring the MV1000/MV2000
1
2
3
4
5
6
7
8
Index
6.1 Starting the Harware Configurator
The Hardware Configurator can transmit and receive the setup data, change the setup
data, and create new setup data. The setting screen may differ from your actual
screen.
Starting the Hardware Configurator
1. Click the [CONFIG] button in the Launcher window.
The setting screen in displayed. The DX2000 setting screen appears by default.
To Load Setup Data from the RD-MV1000/RD-MV2000
Before performing the following procedure, please make sure that the communication
method and parameters are correct. (For details, see section 2.3, “Setting the
Communication Method.”)
1. Click the [Receive Data] button, or choose [Comm.] - [Receive Setting] from the
menu bar.
The [Receive Data] dialog box opens.
2. Click the [OK] button.
Receiving starts.
Chapter 6 Configuring the RD-MV1000/RD-MV2000