Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 45)

3-29
M-4659
Configuring the DX1000/DX2000
1
2
3
4
5
6
7
8
Index
• Service port
The following table indicates the number of simultaneous uses (number of users that
can use the function simultaneously), the maximum number of connections, and the
port number for each function.
Function Maximum
Number of
Connections Number of Simultaneous Uses Port No.
Administrator User
FTP server 2 2 2 *1 21/tcp *3
Web server (HTTP) 1 – – 80/tcp *3
SNTP server – – – 123/udp *3
Modbus server 2 – – 502/tcp *3
Instrument
information server – – – 34264/udp *2
*1 There are user limitations. For details, see the DX1000/DX1000N/DX2000 Communication
interface User’s Manual (IM04L41B01-01E).
*2 The port number is fixed.
*3 The default port number. You can set the value in the range of 1 to 65535. Use the default
port number unless there is a special reason not to do so.
• Status Relay
If an abnormality occurs with items turned ON, relay contact output is performed. In
the [System Configuration] screen, if [FAIL] is set to [FAIL/Alarm relay] (/F2 option) or
[FAIL/Status relay] (/F1 option), the [Status Relay] setting items are displayed.
Detail Setting
• Tag
Settings Description
Tag Displays tags. Channel numbers are displayed for channels that do not
have tags assigned.
Channel Displays channel numbers.
• Language
Select the display language
• Remote controller ID
Select the remote controller ID from 0 to 31. When not using the remote control
terminal, select [OFF].
• Batch
Select [ON] to use the batch function.
• Digit of lot number
Select the number of digits of the lot number from 4, 6, or 8. Select [OFF] to disable
the lot number.
3.6 Entering Basic Settings