Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 272)

8-22
M-4659
Setting the Temperature Unit, Tag/Channel Display, Memory Alarm Time,
Displayed Language, Partial Expanded Display, Batch (Option /BT1, Style
Number S2 or Later) and Time Zone
Click either one (also selectable from [Setting] - [SETUP [Basic] Setting]-[Setting])
Temperature
Select the °C or °F for the temperature unit.
Tag/Channel
Select whether to use the tag (see “Tag” on page 8-6) or channel number as the
measurement/computation channel label.
If you select tag, you can select the label display from tag and channel (see “Selecting
the Characters Used to Identify Channels” on page 4-12).
Memory alarm time
Free space in the internal memory is monitored, and the memory alarm relay (option /F1)
can be programmed to activate some period of time before the memory is completely full.
This time period is called the memory alarm time.
Displayed language
Select the language to be used on the display.
The types of displayed language vary depending on the style number of the DX or MV. If
the style number is S2 or later, you can select German or French in addition to English
and Japanese.
Partial expanded display
If the partial expanded display is set to [Not], the partial expanded display settings of the
Meas/Math tab are void.
Batch function (option /BT1, style number S2 or later)
You can set the batch function when the style number of the DX or MV is S2 or later.
Time zone (style number S4)
Set the time difference from the GMT.
8.5 Configuring the Setup Mode