Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 239)

7-65
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
View Group (CX2000 Only)
Click here. (Or choose the [Setting] menu - [SET [Regular] Setting].)
Specify a view group name
Select or drag from the right the type of
screen to be displayed.
Select the group to be displayed.
Type of screens
available.
View Groups
Up to four view groups can be registered.
Group Name
Use up to 16 alphanumeric characters can be entered for the group name. The group
name appears as a submenu of the [4 PANEL] display.
View Kind
The view group consists of four views. Select the type of screen to display in each view.
Overview cannot be selected on 0 measurement channel models without the calculation
option installed.
Group
The group displayed varies depending on the type of view selected. When selecting
measurement screen for the view kind, select the group from the measurement groups
(Group 1 to 10). When selecting control screen for the view kind, select the group from
the control groups (Group 1 to 8).
7.10 Display Settings