Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 77)

4-5
M-4659
Displaying Data with the Data V
iewer
1
2
3
4
5
6
7
8
Index
If you click or drag the cursor on the color overview display area, the section of the
waveform is displayed in the waveform display area.
Note
The color overview is turned OFF as default.
General Display Settings
1. Click here ([View] - [General Display Settings]).
3. Click the tab of the group to be configured.
Turn ON/OFF waveform display (Blue is ON)
Turn ON/OFF at once
The waveform corresponding to the waveform No. that is clicked becomes active.
Activate the settings and close the dialog box
Assign numbers to the channels in the selected range in ascending order
Register the channel
Show/Hide the Y-axis
Copy the settings of the first channel in the selected range to all other channels
Initialize
Copy the setup data of the
active waveform number
Select the items to be copied
Paste the copied setup
data to the active
waveform number
Enter the group name
Select normal display or exponential display
Show/Hide the trip line
Enter the trip line
Enter the display position
Enter the display range
Display color
2. The [General Display Settings] dialog box opens.
Set the maximum and minimum values of the measured
data the maximum and minimum values of the scale.
Group
A maximum of 50 groups can be set. A maximum of 32 channels can be registered in
one group.
4.2 Displaying the Waveform