Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 109)

4-37
M-4659
Displaying Data with the Data V
iewer
1
2
3
4
5
6
7
8
Index
Changing the Save Destination
Select the destination
folder and file and click
the [OK] button
To change the destination folder or the name of the file containing the converted data,
click the [File] button. The [Change the file name] dialog box opens.
Note
• The default group is set to the number of the group that is currently being displayed. The
default channel is set to all channels.
• The name of the destination file is automatically set to the displayed file name followed by
the extension that identifies the data format. For ASCII, Lotus, and Excel conversions, the
file extensions [txt], [wrk] (can be loaded using version 2.0 or later, and [xls] (can be loaded
by version 4.0 or later) are attached, respectively.
• The conversion format of files with and without batch information differs.
• There is a limit in the number of data points that Lotus1-2-3 and Excel can handle. For
these programs, specify the number of data points to be converted before performing the
conversion. Note that even if the number of data points to be converted is within the limits, it
still may not be possible to load the data if there is not enough free memory available on the
PC. If the limit is exceeded, perform automatic division prior to conversion. A serial number
is attached to the file name.
• Do not specify a floppy disk or an external storage medium as the save destination as it will
take a long time for the save operation.
• Do not specify the root directory as the save destination.
• Prepare enough free space on the destination disk.
Conversion Example
ASCII conversion file
4.12 Converting the Data