Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 225)

7-51
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
Copying and Pasting Setup Data
You can copy the setup data of one channel or more to other channels. Use the following
procedure to copy and paste.
1. Click the source channel number that you want to copy. To select many channels,
click the first source channel, then drag over all the channels that you want to copy.
2. Click the [Copy] button at the left of the window.
3. Click the destination channel number. To select many channels, click the first
destination channel, then drag over all the channels where you want to paste.
4. Click the [Paste] button.
You can also copy and paste specific channel items.
After selecting the copy source in step 1, click the [Copy Details] button to display the
[Report Copy Details] dialog box.
Check whether the items you want to copy/paste are selected.
Tag, Memory Alarm Time, Displayed Language, and Partial Expanded Display
Settings
Click either one. (Or choose the [Setting] menu - [SETUP [Basic] Setting] - [Setting].)
Tag/Channel
Select whether to use the tag name or channel number as the measurement/computation
channel label (see “Selecting the Characters Used to Identify Channels” on page 4-12).
If you select tag name, you can select the label display from tag and channel.
Memory Alarm
Free internal memory is monitored, and the memory end output can be programmed to
activate some period of time before the memory is completely full. This time period is
called the memory alarm time.
Language
Select the language ([English], [Japanese], [Germany], [French], or [Chinese]) to be used
on the CX’s display.
Note
Beware that if you configure the system after receiving setup data from the CX, the received
setup data will be initialized. For information on system configuration, refer to section 3.2, “Setting
and Checking the System Configuration and Initializing Setup Data.”
7.7 Basic Measurement Function Basic Settings