Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 88)

4-16
M-4659
Deleting Marks
1. Place Cursor A and Cursor B so that
the mark is between the two.
2. Select [Edit] - [Delete Mark].
The arbitrary marks (green/yellow) and trigger marks (yellow) between Cursor A and
Cursor B are deleted.
Note
• The arbitrary marks placed on the Data Viewer are green. The arbitrary marks (messages)
and trigger points placed on the recorder are yellow.
• Up to 32 characters can be used for a mark name.
Resetting Marks
All arbitrary marks created on the Data Viewer are erased by selecting [Edit] - [Reset
Mark]. The marks (messages) and the trigger point that were created on the recorder but
deleted on the Data Viewer are displayed again.
4.2 Displaying the Waveform