Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 221
7-47
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
Memory Timeup
When [Save] is set to [Auto] under [Memory Sample], specify the date and time of the
save operation.
Timeup type
Select the timing of saving from [OFF], [Hour], [Day], [Week], or [Month]. When you are
not using this function, select [OFF].
Day of the week/Date
When [Timeup type] is [Week], select a day.
When [Timeup type] is [Month], specify the date, between 1 and 28. It is not possible to
specify dates 29 to 31.
Time (hour)
When [Day], [Week], or [Month] is selected as [Timeup type], specify the time of the save
operation. When [Timeup type] is [Hour], this setting is invalid. Specify between [00] and
[23].
Channel (Setting the Burnout and RJC)
Click here. (Or choose the [Setting] menu - [SETUP [Basic] Setting] - [Setting].)
Set to the positive side (100%).
Set to the negative side (0%).
Set the reference junction compensation
to [Internal] or [External].
Burnout
Set the burnout operation. For details, refer to the CX User’s Manual (IM 04L31A01-01E
or IM 04L31A01-03E).
RJC Volt (uV)
This is the reference junction compensation setting for thermocouple inputs. For details,
refer to the CX User’s Manual (IM 04L31A01-01E or IM 04L31A01-03E).
Note
“Channel” settings cannot be entered on 0 measurement channel models. The Channel
command does not appear in the menu.
7.7 Basic Measurement Function Basic Settings