Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 249)

7-75
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
7.16 Starting and Stopping Measurement on the CX
and Checking the CX System Configuration
You can start and stop the CX, as well as display CX system configuration information
from the Hardware Configurator. (Start/Stop operation is only possible with memory
sample and math functions. This software does not support this operation for control
functions.)
Starting and Stopping Measurement
1. Select [Comm] - [Action] -
[Memory & Math] - [Start].
Displaying CX System Configuration Information
1. Select [Comm] - [Action] -
[Hardware Info].
Firmware version
Number of measurement channels
Number of computation channels
Number of control loops
Serial number
Memory capacity
Optional
Recorder type
Number of channels
assigned to external loops