Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 271)

8-21
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the DX100/DX200/DX200C/MV100/MV200
Report (Creating Hourly/Daily/Weekly/Monthly Reports, Option /M1)
Click here (also selectable from [Setting] - [SETUP [Basic] Setting]-[Setting])
Set the date and time at
which to create the report
Enable (ON)/Disable (OFF) the report channel settings
Select the channel to be reported
Report channel
There are 30 channels and 12 channels on the DX200/DX200C/MV200 and DX100/
MV100, respectively.
Converting the reference unit time
Select whether or not to convert the computed results of the TLOG.SUM computation
channels to a specified time unit value. Select [Off (no conversion)], [Sec (seconds)], [Min
(minutes)], or [Hour (hours)].
Copy
For details related to the copy/paste function, see page 8-7.
8.5 Configuring the Setup Mode