Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 215)

7-41
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
• Repeat start segment/Repeat end segment
Set the repeat start segment number and the repeat end segment number when the
repeat function is turned ON or when repeating in the range of “1 to 99.” However, the
maximum value is the maximum segment number set for the pattern. The selectable
range for the maximum value is
Set repeat start segment ≤ repeat end segment.
PV Event (CX Style Number S3 or Later)
The selectable range for the maximum value is 0.0 to 10.0.
With Style2 or earlier, set in the setting menu of the [Setting] tab.
Event Output Setting (PV event-relay output/Time event-relay output/Program
pattern end signal)
You can set the PV event relay output, time event relay output, program pattern end
signal, and displayed groups.
Turn OFF/ON the relay output
Select the number of the relay output terminal
Relay output action (settings cannot be entered here)
7.6 Program Control Related Setup Operations