Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 278)

8-28
M-4659
8.8 Checking the System Configuration and
Initializing Setup Data
Checking the System Configuration
2. The [System Configuration]
dialog box opens.
Click the [DX] tab.
1. Select [System] -
[System Configuration].
Only the system configuration in the setup data file can be checked. If the system
configuration is changed and the [OK] button is clicked, a message “System
Configuration is changed Input & Data are Initialized” appears. Clicking the [OK] button
initializes the data.
Initializing the Setup Data
2. The [initialize confirmation]
dialog box opens.
1. Select [Setting] - [Initialize].
3. Execute the initialization.