Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 230
7-56
M-4659
Graph
Divisions
Select the number of bar graph divisions.
Bar graph
Select the reference position of the bar graph. Selecting [Center] when the bar graph is
vertical produces no effect.
It is set back to [Normal] when the data is checked.
Scale
When using scale display on the trend screen, select the scale display position.
Partial
Expand (%)
Set the boundary for the partial expanded display. The range is 1 to 99%.
Boundary
The conditions used to set the boundary vary depending on the measurement and
computation channels are as follows:
• Measurement channel
When SCALE and SQRT are not used: Span L < boundary < span U
When SCALE and SQRT are used:
Scale L < boundary < scale U
• Computation channel
Span L < boundary < span U
For details, refer to the CX User’s Manual (IM 04L31A01-01E or IM 04L31A01-03E).
Note
The partial expansion settings take effect when the partial expansion function is set to [Use] in
the [Aux] section of the [Setup] tab.
Display Color
You can select the display color of each channel from 16 colors.
7.8 Measurement Channels Settings