Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 175)

7-1
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
Chapter 7 Configuring the CX1000/CX2000
7.1 Starting the Hardware Configurator, the
Hardware Configurator Window, and System
Configuration Settings
The Hardware Configurator can be used to transmit and receive the setup data, change
the setup data, and create new setup data for a CX1000/CX2000 of style number S1-S3.
The setting screen may differ from your actual screen.
Starting the Hardware Configurator
1. Double-click here.
2. The Configurator opens.
Print (section 7.14)
Data check (section 7.11)
Display the version information of Hardware Configurator
Scroll through the screen (left and right)
Menu bar
Toolbar
Scroll through
the screen
(up and down)
New file (section 7.1)
Open file (section 7.1)
Save (section 7.13)
Recieve (section 7.1)
Send (section 7.12)
3. The DX2000 setting screen appears by default. Carry out the procedure
in pages 7-2 to 7-4 to switch to the CX setting screen.