Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 146)

6-31
M-4659
Configuring the MV1000/MV2000
1
2
3
4
5
6
7
8
Index
• Service port
The following table indicates the number of simultaneous uses (number of users that
can use the function simultaneously), the maximum number of connections, and the
port number for each function.
Function Maximum
Number of
Connections Number of Simultaneous Uses Port No.
Administrator User
FTP server 2 2 2 *1 21/tcp *3
Web server (HTTP) 1 – – 80/tcp *3
SNTP server – – – 123/udp *3
Modbus server 2 – – 502/tcp *3
Instrument
information server – – – 34264/udp *2
*1 There are user limitations. For details, see the RD-MV1000/RD-MV2000 Communication
interface User’s Manual (IM RD-MV1000-17E).
*2 The port number is fixed.
*3 The default port number. You can set the value in the range of 0 to 65535. Use the default
port number unless there is a special reason not to do so.
• Status Relay
If an abnormality occurs with items turned ON, relay contact output is performed. In
the [System Configuration] screen, if [FAIL] is set to [FAIL/Alarm relay] or [FAIL/Status
relay], the [Status Relay] setting items are displayed.
Detail Setting
• Tag
Settings Description
Tag Displays tags. Channel numbers are displayed for channels that do not
have tags assigned.
Channel Displays channel numbers.
• Language
Select the display language
• Decimal Point Type
Settings Description
Point Sets the decimal point to a dot. Example: 1234.56
Comma Sets the decimal point to a comma. Example: 1234,56
6.6 Entering Basic Settings