Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 158)

6-43
M-4659
Configuring the MV1000/MV2000
1
2
3
4
5
6
7
8
Index
FTP
The data files are automatically transferred to the FTP destination.
File Type Description
Display data file Data files are automatically transferred at each file save interval.
Event data file Files are automatically transferred when the data length of data is
recorded.
Report file Data files are automatically transferred every time a report is created.
Snapshot data file The files are automatically transferred when a snapshot is executed.
They are transferred regardless of the media storage setting.
* Indicates snapshot using the FUNC key, communication command (EV2 command), USER
key, or remote control function.
Setting the FTP connection destination
Consult your network administrator when setting parameters such as the primary/
secondary FTP servers, port number, login name, password, account, and availability of
the PASV mode.
• Primary, Secondary
You can specify two destination FTP servers, [Primary] and [Secondary]. If the
primary FTP server is down, the file is transferred to the secondary FTP server.
• Server Name
Enter the name of the file transfer destination FTP server using up to 64 alphanumeric
characters.
• If the DNS is used, you can set the host name as a server name.
• You can also set the IP address. In this case, the DNS is not required.
• Port No.
Enter the port number of the file transfer destination FTP server in the range of 1 to
65535. The default value is 21.
• Login Name
Enter the login name for accessing the FTP server using up to 32 alphanumeric
characters.
• Password
Enter the password for accessing the FTP server using up to 32 alphanumeric
characters.
• Account
Enter the account (ID) for accessing the FTP server using up to 32 alphanumeric
characters.
• PASV
Select [ON] when using the MV behind a firewall that requires the passive mode. The
default setting is [OFF].
6.6 Entering Basic Settings