Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 176)

7-2
M-4659
Loading Setup Data from the CX
Before performing the following procedure, make sure that the communication method
and parameters are correct. For details, see section 2.3, “Setting the Communication
Method.”
2. The [Recieve Data] dialog box opens.
1. Click the [Recieve] button or select
[Recieve Setting] on the [Comm.] menu.
3. Click the [OK] button to recieve the setup data.
Recieve
Note
Do not load setup data when entering program control function settings on the CX, or when a
medium is being accessed. A communications error can result.
7.1 Starting the Hardware Configurator, the Hardware Configurator Window, and System Configuration Settings